TDM
Audio Advanced Crossovers.
TDM Design's 24CX-2/3/4 electronic crossovers
represent the latest in state-of-the-art design and
manufacturing technology. Innovative electrical and
mechanical design concepts and implementation
have resulted in a product of superior performance.
Flat summed response of the low and high
frequency outputs of the 4th order Linkwitz-Riley
crossover is made possible by using precision 2%
metal oxide film resistors, hand selected capacitors, and
the industry's only precision matched and selected
l% four-gang Frequency Range potentiometer.
Precision High Slew-Rate, Low Noise operational
amplifiers
guarantee the finest in sound quality and overall
electrical performance.
Excellence in design, however, does not stop
with the
electrical circuitry because the modular setup gives the
greatest flexibility possible. Each filter section can be
used independently or combined with any of the other
sections. An example would be using a 24CX-4 to run
a mono 3-way main speaker system and two
independent Biamped monitor speakers and reconfigured
later should the need arise.
The Model 24CX-2/3/4 is a system designed product.
You can use it either in a balanced or unbalanced
mode or in any combination thereof. A built-in
constant directivity horn equalization circuit can be
activated on any of the high outputs. All outputs have
an internal insertion connector to allow the use of a
filter, delay, user adjustable parametric equalization
circuit.
|
Optional
OC-AP filter card allows up to 600 microseconds of delay
at the LF output for time allignment of speakers. |
|
Optional
OC-FF Fixed frequency band pass filter |
|
Optional
OC-PM Two Band Full Parametric Equalizer |
|
True RMS
computing limiters (LIMF Option) act on average signal
level while still allowing the peaks to pass relatively
unaffected. |
|
Precision
High slew-rate, low noise circuitry for unmatched excellence
in sound quality. |
|
Precision
High slew-rate, low noise circuitry for unmatched excellence
in sound quality. |
|
Built-in
Selectable Constant Directivity horn equalization. |
|
Security
cover included. |
|
Optional
Adjustable True RMS limiters on each output. |
|
Insertion
connector on each output for option cards. |
|
24DB per
octave crossover slopes for greater driver protection. |
|
4th order
State Variable Linkwitz-Riley Filter design. |
|
Flat summed
electrical response throughout the crossover region. |
|
Optional
low summing. |
|
Balanced
or Unbalanced inputs and outputs. |
|